Hello NeoRouter forum,

I currently have a Tomato WDS.
Internet<------>DHCP master router (192.168.1.1)<------>slave 1(192.168.1.2)<----->slave (192.168.1.3)


Set up explained here in this blog:
http://www.myopenrouter.com/blog/entry/10354/Configure-WDS-with-Tomato-Firmware/

Will NeoRouter work with this netork config?

Thanks,
-David

Generally it should work well in your network.

Let us know if you have any problem.

Thanks,
KevinZ - NeoRouter team

Thanks Kevin,

Do I install the neorouter server firmware on the master router only and use tomato firmware on the slaves?
-David

You can install the NeoRouter firmware on either the master or the slave, but only ONE of them.

I didn't test it in this scenario, but I think it should work, as it's just a Tomato 1.25 and a vpn server running on it.

Let us know if any problem.

Thanks,
KevinZ - NeoRouter team