NeoRouter http://www.neorouter.com/forum/ |
|
Setting up subnets http://www.neorouter.com/forum/viewtopic.php?f=3&t=6031 |
Page 1 of 1 |
Author: | Torchify [ Thu Jan 12, 2017 11:48 pm ] |
Post subject: | Setting up subnets |
I would like to setup subnets on Neorouter Pro but I don't see an interface for assigning subnet to the computers on the list. Can someone point me in the direction of a guide for doing this? |
Author: | kevinz [ Sat Jan 14, 2017 8:30 pm ] |
Post subject: | Re: Setting up subnets |
Hi Torchify, With NR Pro/Mesh, you can create multiple subnets with proper ACL/built-in firewall settings. Here is an exmaple: 1.Users: user1, user2, admin (when nobody sign in to NR, it runs under "Everyone" user) 2.Computers: pc1, pc2, pc3, pc4 3. Subnets: subnet1(pc1, pc2) , subnet2 (pc3, pc4) Generally, subnet1 and subnet2 are isolated each other, user1 wants to access subnet1, user2 want to access subnet2, however the admin user may want to access all computers cross the subnets. So need to setup the ACL rules in the Configuration Explorer for each computer: 1. pc1 Everyone: Block All User1: Firewall On (or off) admin: Firewall Off 2. pc2 Everyone: Block All User1: Firewall On (or off) admin: Firewall Off 3. pc3 Everyone: Block All User2: Firewall On (or off) admin: Firewall Off 4. pc4 Everyone: Block All User2: Firewall On (or off) admin: Firewall Off When user1 signed into the NR network from anywhere, he can only see the PC1 and PC2. When he signed out, the NR service is running as "Everyone" user, that has "Block All" permission to those PCs, meaning one cannot access the PCS, nor even ping them. Similar to user2. Thanks, KevinZ - NeoRouter team |
Author: | Torchify [ Mon Jan 16, 2017 11:11 am ] |
Post subject: | Re: Setting up subnets |
ok, so subnetting is done only through ACL and not isolation with subnet masks? |
Page 1 of 1 | All times are UTC - 5 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |