| NeoRouter http://www.neorouter.com/forum/ |
|
| Problems With Port Forwarding to LAN http://www.neorouter.com/forum/viewtopic.php?f=3&t=6276 |
Page 1 of 1 |
| Author: | MartinH [ Sun Oct 04, 2020 10:09 am ] |
| Post subject: | Problems With Port Forwarding to LAN |
I have a remote PC that I connect to with RDP using Neorouter. That PC has an IP camera connected to it and I’m trying to connect to that camera remotely to pull a stream from ports 554 and/or 1935 using Neorouter. The addresses involved are 10.0.0.3 for the PC on the Neorouter network and 192.168.1.8 for the IP camera on the LAN. I have opened up 554 and 1935 on Windows Firewall and have set up port forwarding using netsh which seems to be running properly: Code: PS C:\Windows\system32> netsh interface portproxy show all When I try to connect to 10.0.0.3 port 3554 or 1935 using test-netconnection, even on the PC itself, it fails though 192.168.1.8 is working fine on both ports. Any suggestions as to what I am doing wrong here?
Listen on ipv4: Connect to ipv4: Address Port Address Port --------------- ---------- --------------- ---------- 10.0.0.3 554 192.168.1.8 554 10.0.0.3 1935 192.168.1.8 1935 PS C:\Windows\system32> |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|