Community


All times are UTC - 5 hours




Post new topic Reply to topic  [ 2 posts ] 
Author Message
 Post subject: SBS 2003 Installed (2 Network Cards) and using RRAS
PostPosted: Thu Feb 05, 2009 4:17 am 
Offline

Joined: Thu Feb 05, 2009 4:13 am
Posts: 1
Hello

I would like to set this up my on my SBS 2003 server.
There are two network cards in the server with the following information

<WAN IP>---<192.168.1.102>---<192.168.16.2>--<DHCP SCOPE FOR WS>

Now I have setup NeoRouter and I can ping the "SERVER" 8.0.0.1 although I want to be able ping "SERVER" directly to it's 192.168.16.2 address

Is this at all possible, I think it is something to do with the routing perhaps?

Dustin


Top
 Profile  
 
 Post subject: Re: SBS 2003 Installed (2 Network Cards) and using RRAS
PostPosted: Thu Feb 05, 2009 12:53 pm 
Offline

Joined: Sun Nov 16, 2008 6:41 am
Posts: 1878
Hi Dustin,

It's doable but we don't recommend to do this, as it's a little bit difficult for normal users and need to set both server and client computers.

The basic idea is you may want to create a "Bridge Connections" (Network Connections -> Advanced -> Bridge Connections), which combines NeoRouter Connection and your physical adapter. Sometimes, you may want to add static routing manually.

This should work, but we are planning work on a new product that can do bridge easily.

Good luck,
KevinZ - NeoRouter team


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 2 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 11 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to: