NeoRouter
http://www.neorouter.com/forum/

network cable unplugged
http://www.neorouter.com/forum/viewtopic.php?f=4&t=4585
Page 1 of 1

Author:  qazedx [ Fri Feb 18, 2011 7:51 am ]
Post subject:  network cable unplugged

1. hello, I installed server but cant connect to it, in network connections on neorouter connection is said that the cable is unplugged but I am connected to the net what is wrong


2. is it possible to access server pc if it has 3g connection

Author:  luke [ Fri Feb 18, 2011 8:12 am ]
Post subject:  Re: network cable unplugged

hi qazedx,

Thanks for trying NeoRouter. NR server should meet the following requirements:

2.2.1 Server Network Requirements
A NeoRouter server is usually setup on an always-on host that has stable Internet connection and a static or dynamic
public IP address. If server is behind a router (or firewall), user needs to configure the router and expose the
NeoRouter server port (default to 32976) to Internet by port-forwarding.

Please see User's Manual for more details. http://www.neorouter.com/Documents.html

Thanks,
Luke

Author:  qazedx [ Fri Feb 18, 2011 9:45 am ]
Post subject:  Re: network cable unplugged

ok I forwarded port and it works on my home network but I need to be able to access my pc when it is on 3g I cant forward ports on 3g what options do I have ?

Author:  luke [ Fri Feb 18, 2011 10:52 am ]
Post subject:  Re: network cable unplugged

Hi qazedx,

If your PC is mobile, you will need to find another device to serve as nr server. One option is to get a router, flash with Tomato/OpenWRT firmware and install NRServer on it. Then you can install NRClient on the PC and other devices that you use for remote access.

Thanks,
Luke

Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/