Community


All times are UTC - 5 hours




Post new topic Reply to topic  [ 2 posts ] 
Author Message
 Post subject: neorouter client+debian
PostPosted: Wed Nov 14, 2012 5:05 am 
Offline

Joined: Tue Nov 13, 2012 5:13 am
Posts: 1
hi I want to run neorouter client on my debian PC.
I use nrclientcmd -d 1.1.1.1 -u timon -p pass -register to connect to my neorouter server. The connection is established but i can't ping others computer. ifconfig output:
Code:
nrtap     Link encap:Ethernet  HWaddr 02:78:93:91:c2:af 
          inet addr:10.0.0.20  Bcast:10.255.255.255  Mask:255.0.0.0
          inet6 addr: fe80::78:93ff:fe91:c2af/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1300  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:82 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:500
          RX bytes:0 (0.0 B)  TX bytes:3660 (3.5 KiB)

netstat -rn output:
Code:
Destination     Gateway         Genmask         Flags   MSS Window  irtt Iface
192.168.10.0    0.0.0.0         255.255.255.0   U         0 0          0 eth0
10.0.0.0        0.0.0.0         255.0.0.0       U         0 0          0 nrtap
0.0.0.0         192.168.10.1    0.0.0.0         UG        0 0          0 eth0



How i can connect to remote servers?(for example how ping them)
Thanks
Tim

ps iptables is ALL open


Top
 Profile  
 
 Post subject: Re: neorouter client+debian
PostPosted: Wed Nov 14, 2012 8:54 am 
Offline

Joined: Sun Nov 16, 2008 6:41 am
Posts: 1868
Hi timon,

Thanks for contacting us.

Can you try ping from other machine to your debian PC see if it work? If the connection to the NR server is established, the NR VPN tunnel is working. The issue would most likely happen in the settings, firewalls.

1. If you use NR Pro and setup ACL/built-in firewall, please verify it, because
a. you use -register command, it simply registers the device to the NR server, but not sign in as the user. If you setup ACL to block the "everyone", then the packets sent from this computer would be dropped.
Try to run the nrclientcmd without -register option, see if you can see the computer list. Keep the nrclientcmd running, open another term to try ping.

2. Please try arping see if it work.

3. If your debian PC connected to the NR server properly and you said your iptables is turned off, you should be able to ping it from other NR client machine.

Let us know if you still have problem.

Thanks,
KevinZ - NeoRouter team


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 2 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to: