Community


All times are UTC - 5 hours




Post new topic Reply to topic  [ 5 posts ] 
Author Message
 Post subject: unable to run client on debian 5
PostPosted: Mon Oct 19, 2009 10:38 am 
Offline

Joined: Mon Oct 19, 2009 10:20 am
Posts: 2
nrservice will not start, each time i run restart, same results:

[root@coruscant ~]# /etc/init.d/nrservice.sh restart
Stopping NeoRouter client service: nrserviceNo /usr/bin/nrservice found running; none killed.
.
Starting NeoRouter client service: nrservice.
[root@coruscant ~]#

tried to run /usr/bin/nrservice manually, got this:
[root@coruscant ~]# /usr/bin/nrservice
Usage:
ifconfig [-a] [-v] [-s] <interface> [[<AF>] <address>]
[add <address>[/<prefixlen>]]
[del <address>[/<prefixlen>]]
[[-]broadcast [<address>]] [[-]pointopoint [<address>]]
[netmask <address>] [dstaddr <address>] [tunnel <address>]
[outfill <NN>] [keepalive <NN>]
[hw <HW> <address>] [metric <NN>] [mtu <NN>]
[[-]trailers] [[-]arp] [[-]allmulti]
[multicast] [[-]promisc]
[mem_start <NN>] [io_addr <NN>] [irq <NN>] [media <type>]
[txqueuelen <NN>]
[[-]dynamic]
[up|down] ...

<HW>=Hardware Type.
List of possible hardware types:
loop (Local Loopback) slip (Serial Line IP) cslip (VJ Serial Line IP)
slip6 (6-bit Serial Line IP) cslip6 (VJ 6-bit Serial Line IP) adaptive (Adaptive Serial Line IP)
strip (Metricom Starmode IP) ash (Ash) ether (Ethernet)
tr (16/4 Mbps Token Ring) tr (16/4 Mbps Token Ring (New)) ax25 (AMPR AX.25)
netrom (AMPR NET/ROM) rose (AMPR ROSE) tunnel (IPIP Tunnel)
ppp (Point-to-Point Protocol) hdlc ((Cisco)-HDLC) lapb (LAPB)
arcnet (ARCnet) dlci (Frame Relay DLCI) frad (Frame Relay Access Device)
sit (IPv6-in-IPv4) fddi (Fiber Distributed Data Interface) hippi (HIPPI)
irda (IrLAP) ec (Econet) x25 (generic X.25)
eui64 (Generic EUI-64)
<AF>=Address family. Default: inet
List of possible address families:
unix (UNIX Domain) inet (DARPA Internet) inet6 (IPv6)
ax25 (AMPR AX.25) netrom (AMPR NET/ROM) rose (AMPR ROSE)
ipx (Novell IPX) ddp (Appletalk DDP) ec (Econet)
ash (Ash) x25 (CCITT X.25)
ARPING 2.255.255.9

--- 2.255.255.9 statistics ---
1 packets transmitted, 0 packets received, 100% unanswered
nrservice: ../../../Shared/Runtime/Unknown.h:37: CAutoRefCount::~CAutoRefCount(): Assertion `!m_cRefs' failed.
Aborted
[root@coruscant ~]#

extra info:
[root@coruscant ~]# cat /etc/debian_version
5.0.3


Top
 Profile  
 
 Post subject: Re: unable to run client on debian 5
PostPosted: Mon Oct 19, 2009 3:29 pm 
Offline

Joined: Sun Nov 16, 2008 6:41 am
Posts: 1869
Hi R-TypeEman,

Would you help collect the log on Debian? We didn't test on any Debian version yet, but will.

Log How to:
http://www.neorouter.com/wiki/index.php ... og_file.3F

Thanks,
KevinZ - NeoRouter team


Top
 Profile  
 
 Post subject: Re: unable to run client on debian 5
PostPosted: Mon Oct 19, 2009 3:45 pm 
Offline

Joined: Mon Oct 19, 2009 10:20 am
Posts: 2
where should i post the log file?


Top
 Profile  
 
 Post subject: Re: unable to run client on debian 5
PostPosted: Mon Oct 19, 2009 7:03 pm 
Offline

Joined: Sun Nov 16, 2008 6:41 am
Posts: 1869
Please send it to support@neorouter.com. We will investigate it and test it on a Debian.

Thanks,
KevinZ - NeoRouter team


Top
 Profile  
 
 Post subject: Re: unable to run client on debian 5
PostPosted: Tue Oct 20, 2009 2:59 pm 
Offline

Joined: Sun Nov 16, 2008 6:41 am
Posts: 1869
Hi R-TypeEman,

I tested on a Debian 5.0.3 (x86). I installed the NRClient on it and it works well.

I uses the network ISO. After installed the brand new machine, I just run the following commands to update packages and setup ssh. Then installed the nrclient. When installing, I choose the default option (desktop)

Code:
# apt-get update
# apt-get install ssh


I wonder if your system is missing some packages. If you can give more details on your system, it would be very helpful.

Thanks,
KevinZ - NeoRouter team


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 5 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron