NeoRouter http://www.neorouter.com/forum/ |
|
unable to run client on debian 5 http://www.neorouter.com/forum/viewtopic.php?f=8&t=1320 |
Page 1 of 1 |
Author: | R-TypeEman [ Mon Oct 19, 2009 10:38 am ] |
Post subject: | unable to run client on debian 5 |
nrservice will not start, each time i run restart, same results: [root@coruscant ~]# /etc/init.d/nrservice.sh restart Stopping NeoRouter client service: nrserviceNo /usr/bin/nrservice found running; none killed. . Starting NeoRouter client service: nrservice. [root@coruscant ~]# tried to run /usr/bin/nrservice manually, got this: [root@coruscant ~]# /usr/bin/nrservice Usage: ifconfig [-a] [-v] [-s] <interface> [[<AF>] <address>] [add <address>[/<prefixlen>]] [del <address>[/<prefixlen>]] [[-]broadcast [<address>]] [[-]pointopoint [<address>]] [netmask <address>] [dstaddr <address>] [tunnel <address>] [outfill <NN>] [keepalive <NN>] [hw <HW> <address>] [metric <NN>] [mtu <NN>] [[-]trailers] [[-]arp] [[-]allmulti] [multicast] [[-]promisc] [mem_start <NN>] [io_addr <NN>] [irq <NN>] [media <type>] [txqueuelen <NN>] [[-]dynamic] [up|down] ... <HW>=Hardware Type. List of possible hardware types: loop (Local Loopback) slip (Serial Line IP) cslip (VJ Serial Line IP) slip6 (6-bit Serial Line IP) cslip6 (VJ 6-bit Serial Line IP) adaptive (Adaptive Serial Line IP) strip (Metricom Starmode IP) ash (Ash) ether (Ethernet) tr (16/4 Mbps Token Ring) tr (16/4 Mbps Token Ring (New)) ax25 (AMPR AX.25) netrom (AMPR NET/ROM) rose (AMPR ROSE) tunnel (IPIP Tunnel) ppp (Point-to-Point Protocol) hdlc ((Cisco)-HDLC) lapb (LAPB) arcnet (ARCnet) dlci (Frame Relay DLCI) frad (Frame Relay Access Device) sit (IPv6-in-IPv4) fddi (Fiber Distributed Data Interface) hippi (HIPPI) irda (IrLAP) ec (Econet) x25 (generic X.25) eui64 (Generic EUI-64) <AF>=Address family. Default: inet List of possible address families: unix (UNIX Domain) inet (DARPA Internet) inet6 (IPv6) ax25 (AMPR AX.25) netrom (AMPR NET/ROM) rose (AMPR ROSE) ipx (Novell IPX) ddp (Appletalk DDP) ec (Econet) ash (Ash) x25 (CCITT X.25) ARPING 2.255.255.9 --- 2.255.255.9 statistics --- 1 packets transmitted, 0 packets received, 100% unanswered nrservice: ../../../Shared/Runtime/Unknown.h:37: CAutoRefCount::~CAutoRefCount(): Assertion `!m_cRefs' failed. Aborted [root@coruscant ~]# extra info: [root@coruscant ~]# cat /etc/debian_version 5.0.3 |
Author: | kevinz [ Mon Oct 19, 2009 3:29 pm ] |
Post subject: | Re: unable to run client on debian 5 |
Hi R-TypeEman, Would you help collect the log on Debian? We didn't test on any Debian version yet, but will. Log How to: http://www.neorouter.com/wiki/index.php ... og_file.3F Thanks, KevinZ - NeoRouter team |
Author: | R-TypeEman [ Mon Oct 19, 2009 3:45 pm ] |
Post subject: | Re: unable to run client on debian 5 |
where should i post the log file? |
Author: | kevinz [ Mon Oct 19, 2009 7:03 pm ] |
Post subject: | Re: unable to run client on debian 5 |
Please send it to support@neorouter.com. We will investigate it and test it on a Debian. Thanks, KevinZ - NeoRouter team |
Author: | kevinz [ Tue Oct 20, 2009 2:59 pm ] |
Post subject: | Re: unable to run client on debian 5 |
Hi R-TypeEman, I tested on a Debian 5.0.3 (x86). I installed the NRClient on it and it works well. I uses the network ISO. After installed the brand new machine, I just run the following commands to update packages and setup ssh. Then installed the nrclient. When installing, I choose the default option (desktop) Code: # apt-get update # apt-get install ssh I wonder if your system is missing some packages. If you can give more details on your system, it would be very helpful. Thanks, KevinZ - NeoRouter team |
Page 1 of 1 | All times are UTC - 5 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |