i have fellow the exact step you should but no luck i can not access devices on NR here is the log file may be it help see what i am doing wrong Oct 27 10:03:00 NRVPN1 daemon.info dnsmasq-dhcp[1348]: DHCPDISCOVER(br-lan) 00:23:8b:af:0e:ed Oct 27 10:03:00 NRVPN1 daemon.info dnsmasq-dhcp[1348]: DHCPOFFER(br-lan) 192.168.1.204 00:23:8b:af:0e:ed Oct 27 10:03:07 NRVPN1 cron.err crond[1296]: time disparity of 597487 minutes detected Oct 27 10:03:16 NRVPN1 daemon.info dnsmasq-dhcp[1348]: DHCPDISCOVER(br-lan) 00:23:8b:af:0e:ed Oct 27 10:03:16 NRVPN1 daemon.info dnsmasq-dhcp[1348]: DHCPOFFER(br-lan) 192.168.1.204 00:23:8b:af:0e:ed Oct 27 10:04:01 NRVPN1 cron.err crond[1296]: USER root pid 1720 cmd /usr/bin/nrcronclient Oct 27 10:05:01 NRVPN1 cron.err crond[1296]: USER root pid 1954 cmd /usr/bin/nrcronclient Oct 27 10:06:01 NRVPN1 cron.err crond[1296]: USER root pid 2188 cmd /usr/bin/nrcronclient Oct 27 10:07:01 NRVPN1 cron.err crond[1296]: USER root pid 2422 cmd /usr/bin/nrcronclient Oct 27 10:08:01 NRVPN1 cron.err crond[1296]: USER root pid 2656 cmd /usr/bin/nrcronclient Oct 27 10:09:01 NRVPN1 cron.err crond[1296]: USER root pid 2890 cmd /usr/bin/nrcronclient Oct 27 10:09:07 NRVPN1 daemon.info dnsmasq-dhcp[1348]: DHCPDISCOVER(br-lan) 00:23:8b:af:0e:ed Oct 27 10:09:07 NRVPN1 daemon.info dnsmasq-dhcp[1348]: DHCPOFFER(br-lan) 192.168.1.204 00:23:8b:af:0e:ed Oct 27 10:09:07 NRVPN1 daemon.info dnsmasq-dhcp[1348]: DHCPREQUEST(br-lan) 192.168.1.204 00:23:8b:af:0e:ed Oct 27 10:09:07 NRVPN1 daemon.info dnsmasq-dhcp[1348]: DHCPACK(br-lan) 192.168.1.204 00:23:8b:af:0e:ed Home-PC Oct 27 10:10:01 NRVPN1 cron.err crond[1296]: USER root pid 3124 cmd /usr/bin/nrcronclient Oct 27 10:11:01 NRVPN1 cron.err crond[1296]: USER root pid 3358 cmd /usr/bin/nrcronclient Oct 27 10:12:01 NRVPN1 cron.err crond[1296]: USER root pid 3592 cmd /usr/bin/nrcronclient Oct 27 10:13:01 NRVPN1 cron.err crond[1296]: USER root pid 3826 cmd /usr/bin/nrcronclient Oct 27 10:14:01 NRVPN1 cron.err crond[1296]: USER root pid 4060 cmd /usr/bin/nrcronclient Oct 27 10:15:01 NRVPN1 cron.err crond[1296]: USER root pid 4294 cmd /usr/bin/nrcronclient Oct 27 10:16:01 NRVPN1 cron.err crond[1296]: USER root pid 4528 cmd /usr/bin/nrcronclient Oct 27 10:17:01 NRVPN1 cron.err crond[1296]: USER root pid 4762 cmd /usr/bin/nrcronclient Oct 27 10:18:01 NRVPN1 cron.err crond[1296]: USER root pid 4996 cmd /usr/bin/nrcronclient Oct 27 10:19:01 NRVPN1 cron.err crond[1296]: USER root pid 5230 cmd /usr/bin/nrcronclient Oct 27 10:20:01 NRVPN1 cron.err crond[1296]: USER root pid 5464 cmd /usr/bin/nrcronclient Oct 27 10:21:01 NRVPN1 cron.err crond[1296]: USER root pid 5698 cmd /usr/bin/nrcronclient Oct 27 10:21:59 NRVPN1 user.info kernel: rtl8366s rtl8366s: applying initvals Oct 27 10:22:00 NRVPN1 daemon.warn dnsmasq[1348]: failed to access /tmp/resolv.conf.auto: No such file or directory Oct 27 10:22:00 NRVPN1 user.info firewall: removing lan (br-lan) from zone lan Oct 27 10:22:00 NRVPN1 user.info kernel: br-lan: port 3(nrtap) entering disabled state Oct 27 10:22:00 NRVPN1 user.info kernel: br-lan: port 2(eth0.1) entering disabled state Oct 27 10:22:00 NRVPN1 user.info kernel: br-lan: port 1(eth0) entering disabled state Oct 27 10:22:00 NRVPN1 user.info kernel: eth0: link down Oct 27 10:22:00 NRVPN1 user.info kernel: device nrtap left promiscuous mode Oct 27 10:22:00 NRVPN1 user.info kernel: br-lan: port 3(nrtap) entering disabled state Oct 27 10:22:00 NRVPN1 user.info kernel: br-lan: port 2(eth0.1) entering disabled state Oct 27 10:22:00 NRVPN1 user.info kernel: device eth0 left promiscuous mode Oct 27 10:22:00 NRVPN1 user.info kernel: br-lan: port 1(eth0) entering disabled state Oct 27 10:22:01 NRVPN1 user.info firewall: removing wan (eth1) from zone wan Oct 27 10:22:01 NRVPN1 cron.err crond[1296]: USER root pid 6514 cmd /usr/bin/nrcronclient Oct 27 10:22:01 NRVPN1 user.info kernel: eth1: link down Oct 27 10:22:02 NRVPN1 user.notice ifup: Enabling Router Solicitations on loopback (lo) Oct 27 10:22:02 NRVPN1 user.debug kernel: ar71xx: pll_reg 0xb8050010: 0x11110000 Oct 27 10:22:02 NRVPN1 user.info kernel: eth0: link up (1000Mbps/Full duplex) Oct 27 10:22:02 NRVPN1 user.info kernel: device eth0 entered promiscuous mode Oct 27 10:22:02 NRVPN1 user.info kernel: eth0: link down Oct 27 10:22:02 NRVPN1 user.info kernel: device eth0 left promiscuous mode Oct 27 10:22:03 NRVPN1 user.debug kernel: ar71xx: pll_reg 0xb8050010: 0x11110000 Oct 27 10:22:03 NRVPN1 user.info kernel: eth0: link up (1000Mbps/Full duplex) Oct 27 10:22:03 NRVPN1 user.info kernel: device eth0 entered promiscuous mode Oct 27 10:22:03 NRVPN1 user.info kernel: br-lan: port 1(eth0) entering forwarding state Oct 27 10:22:03 NRVPN1 user.info kernel: br-lan: port 2(eth0.1) entering forwarding state Oct 27 10:22:03 NRVPN1 user.info kernel: device nrtap entered promiscuous mode Oct 27 10:22:03 NRVPN1 user.info kernel: br-lan: port 3(nrtap) entering forwarding state Oct 27 10:22:04 NRVPN1 daemon.info dnsmasq[1348]: exiting on receipt of SIGTERM Oct 27 10:22:04 NRVPN1 user.notice dnsmasq: DNS rebinding protection is active, will discard upstream RFC1918 responses! Oct 27 10:22:04 NRVPN1 user.notice dnsmasq: Allowing 127.0.0.0/8 responses Oct 27 10:22:04 NRVPN1 user.debug kernel: ar71xx: pll_reg 0xb8050014: 0x11110000 Oct 27 10:22:04 NRVPN1 user.info kernel: eth1: link up (1000Mbps/Full duplex) Oct 27 10:22:04 NRVPN1 user.notice ifup: Enabling Router Solicitations on lan (br-lan) Oct 27 10:22:04 NRVPN1 user.info firewall: adding lan (br-lan) to zone lan Oct 27 10:22:07 NRVPN1 daemon.info dnsmasq[7044]: started, version 2.55 cachesize 150 Oct 27 10:22:07 NRVPN1 daemon.info dnsmasq[7044]: compile time options: IPv6 GNU-getopt no-DBus no-I18N DHCP TFTP Oct 27 10:22:07 NRVPN1 daemon.info dnsmasq-dhcp[7044]: DHCP, IP range 192.168.1.100 -- 192.168.1.250, lease time 12h Oct 27 10:22:07 NRVPN1 daemon.info dnsmasq[7044]: using local addresses only for domain lan Oct 27 10:22:07 NRVPN1 daemon.info dnsmasq[7044]: reading /tmp/resolv.conf.auto Oct 27 10:22:07 NRVPN1 daemon.info dnsmasq[7044]: using nameserver 68.87.72.130#53 Oct 27 10:22:07 NRVPN1 daemon.info dnsmasq[7044]: using nameserver 68.87.77.130#53 Oct 27 10:22:07 NRVPN1 daemon.info dnsmasq[7044]: using local addresses only for domain lan Oct 27 10:22:07 NRVPN1 daemon.info dnsmasq[7044]: read /etc/hosts - 1 addresses Oct 27 10:22:07 NRVPN1 daemon.info dnsmasq-dhcp[7044]: read /etc/ethers - 0 addresses Oct 27 10:22:07 NRVPN1 user.notice ifup: Allowing Router Advertisements on wan (eth1) Oct 27 10:22:08 NRVPN1 user.info firewall: adding wan (eth1) to zone wan Oct 27 10:22:10 NRVPN1 user.info firewall: adding lan (br-lan) to zone lan Oct 27 10:22:10 NRVPN1 user.info firewall: adding wan (eth1) to zone wan Oct 27 10:23:01 NRVPN1 cron.err crond[1296]: USER root pid 7836 cmd /usr/bin/nrcronclient Oct 27 10:23:41 NRVPN1 user.info kernel: rtl8366s rtl8366s: applying initvals Oct 27 10:23:41 NRVPN1 daemon.warn dnsmasq[7044]: failed to access /tmp/resolv.conf.auto: No such file or directory Oct 27 10:23:41 NRVPN1 user.info firewall: removing lan (br-lan) from zone lan Oct 27 10:23:41 NRVPN1 user.info kernel: br-lan: port 3(nrtap) entering disabled state Oct 27 10:23:41 NRVPN1 user.info kernel: br-lan: port 2(eth0.1) entering disabled state Oct 27 10:23:41 NRVPN1 user.info kernel: br-lan: port 1(eth0) entering disabled state Oct 27 10:23:42 NRVPN1 user.info kernel: eth0: link down Oct 27 10:23:42 NRVPN1 user.info kernel: device nrtap left promiscuous mode Oct 27 10:23:42 NRVPN1 user.info kernel: br-lan: port 3(nrtap) entering disabled state Oct 27 10:23:42 NRVPN1 user.info kernel: br-lan: port 2(eth0.1) entering disabled state Oct 27 10:23:42 NRVPN1 user.info kernel: device eth0 left promiscuous mode Oct 27 10:23:42 NRVPN1 user.info kernel: br-lan: port 1(eth0) entering disabled state Oct 27 10:23:42 NRVPN1 user.info firewall: removing wan (eth1) from zone wan Oct 27 10:23:43 NRVPN1 user.info kernel: eth1: link down Oct 27 10:23:43 NRVPN1 user.notice ifup: Enabling Router Solicitations on loopback (lo) Oct 27 10:23:43 NRVPN1 user.debug kernel: ar71xx: pll_reg 0xb8050010: 0x11110000 Oct 27 10:23:43 NRVPN1 user.info kernel: eth0: link up (1000Mbps/Full duplex) Oct 27 10:23:43 NRVPN1 user.info kernel: device eth0 entered promiscuous mode Oct 27 10:23:43 NRVPN1 user.info kernel: eth0: link down Oct 27 10:23:43 NRVPN1 user.info kernel: device eth0 left promiscuous mode Oct 27 10:23:44 NRVPN1 user.debug kernel: ar71xx: pll_reg 0xb8050010: 0x11110000 Oct 27 10:23:44 NRVPN1 user.info kernel: eth0: link up (1000Mbps/Full duplex) Oct 27 10:23:44 NRVPN1 user.info kernel: device eth0 entered promiscuous mode Oct 27 10:23:44 NRVPN1 user.info kernel: br-lan: starting userspace STP failed, starting kernel STP Oct 27 10:23:44 NRVPN1 user.info kernel: br-lan: topology change detected, propagating Oct 27 10:23:44 NRVPN1 user.info kernel: br-lan: port 1(eth0) entering forwarding state Oct 27 10:23:44 NRVPN1 user.info kernel: device nrtap entered promiscuous mode Oct 27 10:23:44 NRVPN1 user.info kernel: br-lan: topology change detected, propagating Oct 27 10:23:44 NRVPN1 user.info kernel: br-lan: port 2(nrtap) entering forwarding state Oct 27 10:23:45 NRVPN1 daemon.info dnsmasq[7044]: exiting on receipt of SIGTERM Oct 27 10:23:45 NRVPN1 user.notice dnsmasq: DNS rebinding protection is active, will discard upstream RFC1918 responses! Oct 27 10:23:45 NRVPN1 user.notice dnsmasq: Allowing 127.0.0.0/8 responses Oct 27 10:23:45 NRVPN1 user.debug kernel: ar71xx: pll_reg 0xb8050014: 0x11110000 Oct 27 10:23:45 NRVPN1 user.info kernel: eth1: link up (1000Mbps/Full duplex) Oct 27 10:23:45 NRVPN1 user.notice ifup: Enabling Router Solicitations on lan (br-lan) Oct 27 10:23:45 NRVPN1 user.info firewall: adding lan (br-lan) to zone lan Oct 27 10:23:48 NRVPN1 daemon.info dnsmasq[8993]: started, version 2.55 cachesize 150 Oct 27 10:23:48 NRVPN1 daemon.info dnsmasq[8993]: compile time options: IPv6 GNU-getopt no-DBus no-I18N DHCP TFTP Oct 27 10:23:48 NRVPN1 daemon.info dnsmasq-dhcp[8993]: DHCP, IP range 192.168.1.100 -- 192.168.1.250, lease time 12h Oct 27 10:23:48 NRVPN1 daemon.info dnsmasq[8993]: using local addresses only for domain lan Oct 27 10:23:48 NRVPN1 daemon.warn dnsmasq[8993]: failed to access /tmp/resolv.conf.auto: No such file or directory Oct 27 10:23:48 NRVPN1 daemon.info dnsmasq[8993]: read /etc/hosts - 1 addresses Oct 27 10:23:48 NRVPN1 daemon.info dnsmasq-dhcp[8993]: read /etc/ethers - 0 addresses Oct 27 10:23:48 NRVPN1 user.notice ifup: Allowing Router Advertisements on wan (eth1) Oct 27 10:23:51 NRVPN1 user.info firewall: adding lan (br-lan) to zone lan Oct 27 10:23:51 NRVPN1 user.info firewall: adding wan (eth1) to zone wan Oct 27 10:24:01 NRVPN1 cron.err crond[1296]: USER root pid 9472 cmd /usr/bin/nrcronclient Oct 27 10:24:07 NRVPN1 daemon.info dnsmasq[8993]: reading /tmp/resolv.conf.auto Oct 27 10:24:07 NRVPN1 daemon.info dnsmasq[8993]: using nameserver 68.87.72.130#53 Oct 27 10:24:07 NRVPN1 daemon.info dnsmasq[8993]: using nameserver 68.87.77.130#53 Oct 27 10:24:07 NRVPN1 daemon.info dnsmasq[8993]: using local addresses only for domain lan Oct 27 10:25:01 NRVPN1 cron.err crond[1296]: USER root pid 9874 cmd /usr/bin/nrcronclient Oct 27 10:25:20 NRVPN1 user.info kernel: rtl8366s rtl8366s: applying initvals Oct 27 10:25:20 NRVPN1 daemon.warn dnsmasq[8993]: failed to access /tmp/resolv.conf.auto: No such file or directory Oct 27 10:25:20 NRVPN1 user.info firewall: removing lan (br-lan) from zone lan Oct 27 10:25:20 NRVPN1 user.info kernel: br-lan: port 2(nrtap) entering disabled state Oct 27 10:25:20 NRVPN1 user.info kernel: br-lan: port 1(eth0) entering disabled state Oct 27 10:25:20 NRVPN1 user.info kernel: eth0: link down Oct 27 10:25:20 NRVPN1 user.info kernel: device nrtap left promiscuous mode Oct 27 10:25:20 NRVPN1 user.info kernel: br-lan: port 2(nrtap) entering disabled state Oct 27 10:25:20 NRVPN1 user.info kernel: device eth0 left promiscuous mode Oct 27 10:25:20 NRVPN1 user.info kernel: br-lan: port 1(eth0) entering disabled state Oct 27 10:25:21 NRVPN1 user.info firewall: removing wan (eth1) from zone wan Oct 27 10:25:22 NRVPN1 user.info kernel: eth1: link down Oct 27 10:25:22 NRVPN1 user.notice ifup: Enabling Router Solicitations on loopback (lo) Oct 27 10:25:23 NRVPN1 user.debug kernel: ar71xx: pll_reg 0xb8050010: 0x11110000 Oct 27 10:25:23 NRVPN1 user.info kernel: eth0: link up (1000Mbps/Full duplex) Oct 27 10:25:23 NRVPN1 user.info kernel: device eth0 entered promiscuous mode Oct 27 10:25:23 NRVPN1 user.info kernel: eth0: link down Oct 27 10:25:23 NRVPN1 user.info kernel: device eth0 left promiscuous mode Oct 27 10:25:23 NRVPN1 user.debug kernel: ar71xx: pll_reg 0xb8050010: 0x11110000 Oct 27 10:25:23 NRVPN1 user.info kernel: eth0: link up (1000Mbps/Full duplex) Oct 27 10:25:23 NRVPN1 user.info kernel: device eth0 entered promiscuous mode Oct 27 10:25:23 NRVPN1 user.info kernel: br-lan: starting userspace STP failed, starting kernel STP Oct 27 10:25:23 NRVPN1 user.info kernel: br-lan: topology change detected, propagating Oct 27 10:25:23 NRVPN1 user.info kernel: br-lan: port 1(eth0) entering forwarding state Oct 27 10:25:23 NRVPN1 user.info kernel: device nrtap entered promiscuous mode Oct 27 10:25:23 NRVPN1 user.info kernel: br-lan: topology change detected, propagating Oct 27 10:25:23 NRVPN1 user.info kernel: br-lan: port 2(nrtap) entering forwarding state Oct 27 10:25:24 NRVPN1 user.debug kernel: ar71xx: pll_reg 0xb8050014: 0x11110000 Oct 27 10:25:24 NRVPN1 user.info kernel: eth1: link up (1000Mbps/Full duplex) Oct 27 10:25:24 NRVPN1 daemon.info dnsmasq[8993]: exiting on receipt of SIGTERM Oct 27 10:25:24 NRVPN1 user.notice dnsmasq: DNS rebinding protection is active, will discard upstream RFC1918 responses! Oct 27 10:25:24 NRVPN1 user.notice dnsmasq: Allowing 127.0.0.0/8 responses Oct 27 10:25:24 NRVPN1 user.notice ifup: Enabling Router Solicitations on lan (br-lan) Oct 27 10:25:25 NRVPN1 user.notice ifup: Allowing Router Advertisements on wan (eth1) Oct 27 10:25:25 NRVPN1 user.info firewall: adding lan (br-lan) to zone lan Oct 27 10:25:26 NRVPN1 user.info firewall: adding wan (eth1) to zone wan Oct 27 10:25:27 NRVPN1 daemon.info dnsmasq[10998]: started, version 2.55 cachesize 150 Oct 27 10:25:27 NRVPN1 daemon.info dnsmasq[10998]: compile time options: IPv6 GNU-getopt no-DBus no-I18N DHCP TFTP Oct 27 10:25:27 NRVPN1 daemon.info dnsmasq-dhcp[10998]: DHCP, IP range 192.168.1.100 -- 192.168.1.250, lease time 12h Oct 27 10:25:27 NRVPN1 daemon.info dnsmasq[10998]: using local addresses only for domain lan Oct 27 10:25:27 NRVPN1 daemon.info dnsmasq[10998]: reading /tmp/resolv.conf.auto Oct 27 10:25:27 NRVPN1 daemon.info dnsmasq[10998]: using nameserver 68.87.72.130#53 Oct 27 10:25:27 NRVPN1 daemon.info dnsmasq[10998]: using nameserver 68.87.77.130#53 Oct 27 10:25:27 NRVPN1 daemon.info dnsmasq[10998]: using local addresses only for domain lan Oct 27 10:25:27 NRVPN1 daemon.info dnsmasq[10998]: read /etc/hosts - 1 addresses Oct 27 10:25:27 NRVPN1 daemon.info dnsmasq-dhcp[10998]: read /etc/ethers - 0 addresses Oct 27 10:25:30 NRVPN1 user.info firewall: adding lan (br-lan) to zone lan Oct 27 10:25:30 NRVPN1 user.info firewall: adding wan (eth1) to zone wan Oct 27 10:26:01 NRVPN1 cron.err crond[1296]: USER root pid 11556 cmd /usr/bin/nrcronclient Oct 27 10:27:01 NRVPN1 cron.err crond[1296]: USER root pid 11959 cmd /usr/bin/nrcronclient Oct 27 10:28:01 NRVPN1 cron.err crond[1296]: USER root pid 12361 cmd /usr/bin/nrcronclient Oct 27 10:28:52 NRVPN1 user.info firewall: adding lan (br-lan) to zone lan Oct 27 10:28:52 NRVPN1 user.info firewall: adding wan (eth1) to zone wan Oct 27 10:29:01 NRVPN1 cron.err crond[1296]: USER root pid 12852 cmd /usr/bin/nrcronclient Oct 27 10:30:01 NRVPN1 cron.err crond[1296]: USER root pid 12862 cmd /usr/bin/nrcronclient Oct 27 10:31:00 NRVPN1 user.info firewall: adding lan (br-lan) to zone lan Oct 27 10:31:00 NRVPN1 user.info firewall: adding wan (eth1) to zone wan Oct 27 10:31:01 NRVPN1 cron.err crond[1296]: USER root pid 13306 cmd /usr/bin/nrcronclient Oct 27 10:32:01 NRVPN1 cron.err crond[1296]: USER root pid 13312 cmd /usr/bin/nrcronclient Oct 27 10:33:01 NRVPN1 cron.err crond[1296]: USER root pid 13335 cmd /usr/bin/nrcronclient
|