Community


All times are UTC - 5 hours




Post new topic Reply to topic  [ 17 posts ]  Go to page 1, 2  Next
Author Message
 Post subject: nrserver failed to start error -2147024848 freebsd [SOLVED]
PostPosted: Sun Sep 25, 2011 3:45 am 
Offline

Joined: Sun Sep 25, 2011 3:28 am
Posts: 17
Hi all.
Didn't find the answer through search, so I have to ask directly.

FreeBSD 8.1 x32, fresh install.
Client works fine (connected to test server on XP, ok).
But there are problems with server.
I created a domain, added a user but then...
First, I couldn't connect to it even locally with error 0x80070039.
I started digging and found, that the server didn't start.
nrserver -run fails with "nrserver failed to start due to error -2147024848"
nrserver -run --dbroot /usr/home/xxxx/neor failed with "nrserver failed to start due to error -2139029481"
I don't even know, what does the error codes mean, so I'm stuck.
Help me, please :)


Last edited by zloben on Tue Oct 18, 2011 11:46 am, edited 1 time in total.

Top
 Profile  
 
 Post subject: Re: nrserver failed to start due to error -2147024848 freebsd
PostPosted: Sun Sep 25, 2011 12:52 pm 
Offline

Joined: Sun Sep 25, 2011 3:28 am
Posts: 17
Just to be sure - here's process list...
Running under root account.
Looks like nrserver is up, but still cannot connect.
What am I missing here? :)
Any help would be appreciated...

tbsd# ps -ax
PID TT STAT TIME COMMAND
0 ?? DLs 0:00.63 [kernel]
1 ?? ILs 0:00.07 /sbin/init --
2 ?? DL 0:01.48 [g_event]
3 ?? DL 0:00.29 [g_up]
4 ?? DL 0:00.80 [g_down]
5 ?? DL 0:00.00 [mpt_recovery0]
6 ?? DL 0:00.14 [fdc0]
7 ?? DL 0:00.00 [sctp_iterator]
8 ?? DL 0:00.00 [xpt_thrd]
9 ?? DL 0:00.04 [pagedaemon]
10 ?? DL 0:00.00 [audit]
11 ?? RL 604:19.76 [idle]
12 ?? WL 0:48.92 [intr]
13 ?? DL 0:01.34 [yarrow]
14 ?? DL 0:00.00 [vmdaemon]
15 ?? DL 0:00.00 [pagezero]
16 ?? DL 0:00.15 [bufdaemon]
17 ?? DL 0:00.13 [vnlru]
18 ?? DL 0:01.02 [syncer]
19 ?? DL 0:00.56 [softdepflush]
20 ?? DL 0:00.10 [flowcleaner]
493 ?? Ss 0:00.01 /sbin/devd
626 ?? Ss 0:00.40 /usr/sbin/syslogd -s
769 ?? Is 0:03.12 /usr/local/bin/nrservice
772 ?? Is 0:01.04 /usr/local/bin/nrserver

988 ?? Ss 0:00.01 /usr/sbin/sshd
996 ?? Ss 0:00.92 sendmail: accepting connections (sendmail)
1000 ?? Is 0:00.03 sendmail: Queue runner@00:30:00 for /var/spool/client
1007 ?? Is 0:00.77 /usr/sbin/cron -s
2157 ?? Ss 0:00.08 sshd: zloben [priv] (sshd)
2160 ?? S 0:00.01 sshd: zloben@pts/0 (sshd)
1304 v0 Is+ 0:00.01 /usr/libexec/getty Pc ttyv0
1081 v1 Is+ 0:00.01 /usr/libexec/getty Pc ttyv1
1082 v2 Is+ 0:00.00 /usr/libexec/getty Pc ttyv2
1083 v3 Is+ 0:00.00 /usr/libexec/getty Pc ttyv3
1084 v4 Is+ 0:00.00 /usr/libexec/getty Pc ttyv4
1085 v5 Is+ 0:00.00 /usr/libexec/getty Pc ttyv5
1086 v6 Is+ 0:00.00 /usr/libexec/getty Pc ttyv6
1087 v7 Is+ 0:00.00 /usr/libexec/getty Pc ttyv7
2161 0 Ss 0:00.01 -sh (sh)
2162 0 S 0:00.01 su
2163 0 R 0:00.01 _su (csh)
2167 0 R+ 0:00.00 ps -ax


Top
 Profile  
 
 Post subject: Re: nrserver failed to start due to error -2147024848 freebsd
PostPosted: Sun Sep 25, 2011 7:47 pm 
Offline

Joined: Mon Dec 22, 2008 10:19 pm
Posts: 436
hi zloben,

Thank you for using NeoRouter.

Errors starting with 0x8007???? are system errors, and you can look them up in errno.h.
0x80070039 is ENOTCONN.
-2147024848 = 0x80070030, is EADDRINUSE. It means nrserver already started and is bound to port 32976.
Code:
    from errno.h   
    #define ENOTCONN        57              /* Socket is not connected */
    #define EADDRINUSE      48              /* Address already in use */


Error 0x80810017 means nrserver cannot find the SSL certificate files, because you changed dbroot.

Thanks,
Luke

_________________
Luke - NeoRouter Team


Top
 Profile  
 
 Post subject: Re: nrserver failed to start due to error -2147024848 freebsd
PostPosted: Mon Sep 26, 2011 4:47 am 
Offline

Joined: Sun Sep 25, 2011 3:28 am
Posts: 17
Thanks for the reply, Luke.
I've changed dbroot back to /usr/local/ZebraNetworkSystems/Neorouter, so I'm stuck where I've started - fighting with the "Socket is not connected" error when connecting locally (i.e. to the server at the same machine).
I'll try to connect from another machine later (with XP or Ubuntu) and see what error will it produce...

But still - maybe you can point me, how can I get past this error? Even the direction will be appreciated, because google didn't help me.
Please, help :)


Top
 Profile  
 
 Post subject: Re: nrserver failed to start due to error -2147024848 freebsd
PostPosted: Mon Sep 26, 2011 10:09 am 
Offline

Joined: Sun Sep 25, 2011 3:28 am
Posts: 17
XP fails to connect with error 0x 80072749
Ubuntu fails to connect with error 0x 8007006b

Since it's happening even with a wrong username/password, I assume it's a problem with connection to neorouter server...

Still stuck :)


Top
 Profile  
 
 Post subject: Re: nrserver failed to start due to error -2147024848 freebsd
PostPosted: Mon Sep 26, 2011 9:43 pm 
Offline

Joined: Mon Dec 22, 2008 10:19 pm
Posts: 436
hi zloben,

The error is most likely caused by firewall or hairpin. Please follow the trouble shooting guide in User's Manual "section 7.1" (http://www.neorouter.com/Documents.html).

Thanks,
Luke

_________________
Luke - NeoRouter Team


Top
 Profile  
 
 Post subject: Re: nrserver failed to start due to error -2147024848 freebsd
PostPosted: Mon Oct 10, 2011 5:39 am 
Offline

Joined: Sun Sep 25, 2011 3:28 am
Posts: 17
Hi Luke.
I followed the troubleshooting guide, but, as I said, it's a fresh install of FreeBSD without anything enabled. But I checked it, just to be sure - it's not enabled :)

Looks like the server is listening to IPv6, ignoring Features.ini

Code:
tbsd# netstat -a | grep LISTEN
tcp4       0      0 localhost.smtp         *.*                    LISTEN
tcp4       0      0 *.ssh                  *.*                    LISTEN
tcp6       0      0 *.ssh                  *.*                    LISTEN
tcp4       0      0 localhost.32975        *.*                    LISTEN
tcp6       0      0 *.nrserver             *.*                    LISTEN


Feature.ini consists only of

Code:
#Description: Specify host IP type for nrserver
#Options:     0-detect; 1-IPv4; 2-IPv6; 3-Dual
#Default:     0
HostIPType=0


I've read about some problem in Freebsd with 3-symbol network adapter, but mine is em0, not msk0 or something.

Is there any way to make it follow the options in the Feature.ini file?
Or shall I really try to pluck the ipv6 out of the FreeBSD core?


Top
 Profile  
 
 Post subject: Re: nrserver failed to start due to error -2147024848 freebsd
PostPosted: Sat Oct 15, 2011 8:51 am 
Offline

Joined: Mon Dec 22, 2008 10:19 pm
Posts: 436
hi zloben,

Issue 1 - HostIPType setting:
If the value is 0, NeoRouter will automatically detect whether your computer supports IPv6. If NeoRouter listens at IPv6, it will accept both v6 and v4 incoming connections. To force NeoRouter to listen at IPv4 only, you can set HostIPType to 1.

Issue 2 - network adapter names
You can use the following setting to override the default detection logic. In your case, you can put "NicInterfaceName=em".
Code:
   
#Description: Network Interface name used for getting MAC address
#Options:     the primary network interface having MAC address
#Default:     eth (on Linux) or ed (on FreeBSD)
NicInterfaceName=eth


Thanks,
Luke

_________________
Luke - NeoRouter Team


Top
 Profile  
 
 Post subject: Re: nrserver failed to start due to error -2147024848 freebsd
PostPosted: Mon Oct 17, 2011 5:03 am 
Offline

Joined: Sun Sep 25, 2011 3:28 am
Posts: 17
Sorry, I've copied the template, not the real file listing.
Of course, it was 1, not 0 - that's why I wrote "it ignores Features.ini".

I'll try the 2nd way you described, maybe it'll help.
Thanks a lot!


Top
 Profile  
 
 Post subject: Re: nrserver failed to start due to error -2147024848 freebsd
PostPosted: Mon Oct 17, 2011 9:34 am 
Offline

Joined: Sun Sep 25, 2011 3:28 am
Posts: 17
Nope, stuck at the same point.
Still listening to IPv6, still cannot connect due to "socket not connected", still suspecting the ignoring the feature.ini file.

Well......
I'm sorry for being troublesome, but the same problem appears on EVERY FreeBSD system I make.
I'll try to set up a 8.2 version of FreeBSD on a new virtual machine, but I doubt it will help.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 17 posts ]  Go to page 1, 2  Next

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron