I entered the new command and rebooted - all is working fine
I installed neoclient and configured the neorouter
The df command reported only 15 % used /jffs
Now to see if i can make it all work
I setup 3 pcs
and they now have a virtual network
10.8.0.2
10.8.0.3
10.8.0.4
and network explorer on each pc see each other.
I also port forwarded the 192.168.2 32976(neorouter) on my main router 192.168.1.1
The neoserver
port shows 32976
dhcp - 10.8.0.0
mask 255.255.0.0
----------------------------------------------------------
THE REAL WORLD TEST
I have setup an hfs server which is on 10.8.0.4:8000. It is set to respond only to incoming on 10.8.0.4:8000
When i use a local pc browser to connect to it using 10.8.0.4, the server responds.
I had a friend run neorouter portable client on his pc , he was able to connect and see the other computers.
However, when he used a browser with
http://10.8.0.4:8000 (my hfs file server, it timed out.
The only hardwired ethernet connection on my neorouter (192.168.1.2) is the connection to the main router(192.168.1.1) which is connected to the internet.
Did Port forward for 192.168.1.2 :32976(neorouter) on my main router 192.168.1.1
Any idea what might be wrong?
Thanks for the quick reply!!
Joe