NeoRouter
http://www.neorouter.com/forum/

ifconfig help syntax on server reboot
http://www.neorouter.com/forum/viewtopic.php?f=8&t=5048
Page 1 of 1

Author:  4ltsen [ Mon Apr 16, 2012 8:44 pm ]
Post subject:  ifconfig help syntax on server reboot

when I restart nrserver i see following usage on centos 6.2

[root@nrserver NeoRouter]# /etc/rc3.d/S99nrserver.sh restart
Shutting down nrserver services: /bin/bash: line 1: 2619 Terminated /usr/bin/nrserver
Starting nrserver services: [ OK ]
[root@nrserver NeoRouter]#
[root@nrserver NeoRouter]#
[root@nrserver NeoRouter]#
[root@nrserver NeoRouter]#
[root@nrserver NeoRouter]# Usage:
ifconfig [-a] [-v] [-s] <interface> [[<AF>] <address>]
[add <address>[/<prefixlen>]]
[del <address>[/<prefixlen>]]
[[-]broadcast [<address>]] [[-]pointopoint [<address>]]
[netmask <address>] [dstaddr <address>] [tunnel <address>]
[outfill <NN>] [keepalive <NN>]
[hw <HW> <address>] [metric <NN>] [mtu <NN>]
[[-]trailers] [[-]arp] [[-]allmulti]
[multicast] [[-]promisc]
[mem_start <NN>] [io_addr <NN>] [irq <NN>] [media <type>]
[txqueuelen <NN>]
[[-]dynamic]
[up|down] ...

<HW>=Hardware Type.
List of possible hardware types:
loop (Local Loopback) slip (Serial Line IP) cslip (VJ Serial Line IP)
slip6 (6-bit Serial Line IP) cslip6 (VJ 6-bit Serial Line IP) adaptive (Adaptive Serial Line IP)
strip (Metricom Starmode IP) ash (Ash) ether (Ethernet)
tr (16/4 Mbps Token Ring) tr (16/4 Mbps Token Ring (New)) ax25 (AMPR AX.25)
netrom (AMPR NET/ROM) rose (AMPR ROSE) tunnel (IPIP Tunnel)
ppp (Point-to-Point Protocol) hdlc ((Cisco)-HDLC) lapb (LAPB)
arcnet (ARCnet) dlci (Frame Relay DLCI) frad (Frame Relay Access Device)
sit (IPv6-in-IPv4) fddi (Fiber Distributed Data Interface) hippi (HIPPI)
irda (IrLAP) ec (Econet) x25 (generic X.25)
infiniband (InfiniBand)
<AF>=Address family. Default: inet
List of possible address families:
unix (UNIX Domain) inet (DARPA Internet) inet6 (IPv6)
ax25 (AMPR AX.25) netrom (AMPR NET/ROM) rose (AMPR ROSE)
ipx (Novell IPX) ddp (Appletalk DDP) ec (Econet)
ash (Ash) x25 (CCITT X.25)

Author:  luke [ Mon Apr 16, 2012 10:37 pm ]
Post subject:  Re: ifconfig help syntax on server reboot

Hi 4ltsen,

You will see it only when you manually restarts nrservice. And you can safely ignore this message.

Thanks,
Luke

Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/