OK, I did an rpm -e against the server and client installs on my server, then deleted the /usr/local/ZebraNetworkSystems directory structure.
Once complete, I did an rpm -i against each, the cserver and client 32 bit packages. After they installed, I did a nrserver -dhcp 192.168.2.50 255.255.255.0
Then I did a nrserver -setdomain <my DYNDNS hostname>
then did a nrserver - adduser username password admin
then, I did a nrclientcmd, when prompted I entered my DYNDNS hostname, then the user and PW entered above for the admin user
It connected.
I uninstalled my Windows 1.9 client, installed the 1.7 client
Now, I went back and ran these exact commands on my linux box:
brctl addbr br
brctl addif br eth0
brctl addif br nrtap
ifconfig nrtap 0.0.0.0 promisc up
ifconfig eth0 0.0.0.0 promisc up
ifconfig br 192.168.2.123 netmask 255.255.255.0 broadcast 192.168.2.0
ifconfig br down
brctl delbr br
And then rebooted (also, made the below Feature.ini file)
Are these the correct variables given my environment? Something is not right here and I have no clue what. I can connect with the windows client from an external network. Once connected, I can select another windows client that lives within the private network, and has an NR client installed on it, and then remote desktop to it. That works.
However, if I try and go to a device that does not have a NR client installed on it, such as a web server that lives on
http://192.168.2.110, it cannot get to it. My Feature.ini looks like this:
[Default]
NetworkBridge=1
LANSegment1=192.168.2.0/255.255.255.0
What did I miss?