NeoRouter http://www.neorouter.com/forum/ |
|
Openwrt client for MediaTek MT7620A http://www.neorouter.com/forum/viewtopic.php?f=8&t=6019 |
Page 1 of 1 |
Author: | Blackdeath [ Sat Nov 26, 2016 7:01 pm ] |
Post subject: | Openwrt client for MediaTek MT7620A |
Hello Are there any plans to port NeoRouter client to MT7620A based router (for examle xiaomi wifi mini)? Or may be you may give source code to me. I can try to make client for this router and give it to you? |
Author: | kevinz [ Mon Nov 28, 2016 9:39 am ] |
Post subject: | Re: Openwrt client for MediaTek MT7620A |
Hi Blackdeath, If more users request for it, we will support it. Thanks, KevinZ - NeoRouter team |
Author: | Blackdeath [ Mon Nov 28, 2016 3:05 pm ] |
Post subject: | Re: Openwrt client for MediaTek MT7620A |
I can buy this release, if it possible. And I have another question, your download links have in-a-box for AR71xx. Is this release compatibility with Atheros QCA9533-BL3A? |
Author: | kevinz [ Tue Nov 29, 2016 9:26 am ] |
Post subject: | Re: Openwrt client for MediaTek MT7620A |
Hi Blackdeath, NR in-a-box for AR71xx should be compatible with Atheros QCA9533-BL3A, based on the openwrt document for TP-Link TL-WR841ND, but we didn't test it. Thanks, KevinZ - NeoRouter team |
Author: | Blackdeath [ Sun Dec 04, 2016 12:26 pm ] |
Post subject: | Re: Openwrt client for MediaTek MT7620A |
Ok. Finally i choose: 1) "TP-Link MR3020" with Atheros AR9331 or 2) "Asus RT-N56U" with MIPS74Kc: Ralink RT3662F. Is this routers support? |
Author: | esv [ Thu Jan 12, 2017 4:32 am ] |
Post subject: | Re: Openwrt client for MediaTek MT7620A |
Hi, im also looking for a client version for MT7620A (ramips?) . Im using a openvpn solution today, but would be very nice with a neorouter solution instead. |
Author: | esv [ Mon Jan 23, 2017 1:41 am ] |
Post subject: | Re: Openwrt client for MediaTek MT7620A |
Hi, you can run the MIPSEL version of neorouter on a MTK7620A i just added this under system->Software->Configuration it was only all/noarch/ramips_24kec in orignal config, but adding brcm37xx will fix it. original: Code: dest root / dest ram /tmp lists_dir ext /var/opkg-lists option overlay_root /overlay option check_signature 1 then run this command: opkg print-architecture Code: root@GL-MT300A:~# opkg print-architecture ---- arch all 1 arch noarch 1 arch ramips_24kec 10 ---- copy and past output from it in to new config and add "arch brcm47xx 300" new: Code: dest root / dest ram /tmp lists_dir ext /var/opkg-lists option overlay_root /overlay option check_signature 1 arch all 1 arch noarch 1 arch ramips_24kec 10 arch brcm47xx 300 then just run command to install it. worked ok this router, but took almost 30s to install. opkg install ..... |
Page 1 of 1 | All times are UTC - 5 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |