Hi Mario67,
Thanks for trying NeoRouter.
1. Check the NeoRouter server status
After you install the NRServer plugin, it will run the nrserver at 32976 port and set the firewall rule on the box properly to open the port. You don't need to install NRClient on the box, if you just want to connect your computers.
To verify the server status, you can have several steps.
a.On the box, you can check if the nrserver process is running with "ps" or "top" command. If it's not running, you have to investigate the reason.
We tested it on the FON's official v2.3.0.0 DEV firmware, with which just need to install the plugin from our site. We also have received reports from other users that the FON's 2.3 RC4 DEV does not have openssl installed, so that you are required more manual work.
b. If the nrserver is running, you can telnet 127.0.0.1 32976 on the box; or need to investigate the problem.
2. Setup domain
Launch the Configuration Explorer on Windows or use the nrservice command line to setup the NeoRouter domain, e.g. link the NeoRouter domain name you registered with your FON box.
Check out here for more information:
Using Configuration Explorer:
http://www.neorouter.com/wiki/index.php ... r#SettingsUsing nrserver CLI:
http://www.neorouter.com/wiki/index.php ... _InterfaceAfter setting the NeoRouter domain, on the "Dashboard" you will see the public IP address is your router's public IP address. It means, NRClient can use the NeoRouter domain name to access your FON box. If the status is FAIL, like you got right now, there is something wrong.
Quote:
BTW, when you try to log on to the nrserver on the FON box, you can use username "root" and proper password.
Quote:
On in-a-box/Linux/Mac, NRserver accepts all system accounts. When you use Configuration Explorer or Network Explorer to sign in to the NRserver, please use the system account instead of the NeoRouter domain account. And the "log on to" or "domain" in these software means either "NeoRouter Domain" or Internet Domain. (there are some explanations in other posts.)
3. Done.
Let us know if you still have problem.
Thanks,
KevinZ - NeoRouter team